Tabletop Autoclave ITA-223(110V/60Hz)

$2,700.00

The ITA-223 front loading ‘Benchtop’ autoclave range is available in four sizes. These units require no plumbing, and only a standard single phase power supply. A 5.7-inch colour touchscreen with integrated USB data port. Electro polished stainless steel chamber.

Quantity
3-4 Weeks
Share

The ITA-223 front loading ‘Benchtop’ autoclave range is available in four sizes. These units require no plumbing, and only a standard single phase power supply. A 5.7-inch colour touchscreen with integrated USB data port. Electro polished stainless steel chamber. Simple pre-post vacuum option available with adjustable time and temperature range. The ITA-223 is available in four sizes 23 L and is one of the most energy efficient autoclaves available. The pressure vessel design ensures the absolute minimum amount of water is used during a sterilization cycle, which not only means comparably low power consumption, but also very quick heating and cooling. A benchtop autoclave has a variety of uses, being suitable for sterilizing laboratory glassware, plastic receptacles and containers, petri dishes, un-wrapped instruments, media, and occasional discard loads.

In addition to laboratory use, it is widely used in scientific research, process manufacturing, veterinary and medical healthcare industries.

580052001

Data sheet

Sterilisation Temperature (℃ )
121℃,134℃
Operating Temperature (℃ )
134 °C
Chamber Dimensions (mm)
250x450 mm
Capacity (liters)
23 L
Model
ITA-223
Warming Time
0 to 7 minutes
Drying Time
18 minutes
Safety Devices
Safety valve, Pressure interlock, door alarm, automatic breakdown check. Over temperature and pressure protected.
External Dimensions (w x d x h) mm
625x425x456 mm
Shipping Dimensions (w x d x h) mm
750x545x450 mm
Power (W)
2000 W
Electrical Requirements
110V/60Hz
Catalogue No.
580052001
Working Pressure
2.1 bar
  • LCD display panel
  • Adopt Motorola sensor for intelligent and precise control as well as fault auto-detection technique
  • Precise temperature control (±0.5?) during sterilization process
  • Built-in program to clean the pipelines automatically and avoid the blockage
  • Built-in water quality, water shortage and water overrun monitoring features
  • Safety value, double lock, mechanical lock, air lock and multi-level protection to ensure the pressure is safe
  • Optional for printer, built-in USB module to output the sterilization data via USB Flash.
  • Widely applied in orthopaedics, ophthalmology and beauty etc. industries.
  • Micro-computer control, imported Motorola sensor, high accusation and precision.
  • During the sterilizing procedure, the range of temperature is ±0.5.
  • Automatic cleaning program in the steamer, avoid the occlusion.
  • Display the sterilizing procedure date and curve.
  • Water quality monitoring, indicate the water tank condition, automatic notice when used water tank is full.
  • Safety valve, double lock, mechanical lock, air lock, multi pressure safe protection device.
  • Printer is optional, record the sterilizing procedure with USB.
  • Applied with orthopaedics, ophthalmology, beauty industries and other area.
  • Built-in USB interface, can store up to 2000 data cycles
  • Sterilisation data can be transferred to computer/printer
  • New Tabletop Water tank design
  • Pressure, mechanical, electronic door lock system, completely cut off hidden danger.
  • Double temperature monitoring system, analyze and compare the different temperature of the tank, to guarantee and control every heating stage accurately.
  • Adopt high analytical pressure sensor, the pressure can accurate to 0.001 bar, in the mean time we add sampling system to improve the accuracy of information.
  • Circular heating reaches minimum temperature difference. Pressure-prevention and corruption-resistance makes it highly reliable. Alloy heating loop protects against damage by no-water heating.
  • High efficiency double pump, low noise, vacuum ability can reach -0.92 bar, double head ensure the balance during working and stable vacuum state in the chamber.
  • Raise 10 times temperature controlling precision system, can accurate to0.1°C.
  • Stable ULKA water pump
  • Pass by all kinds of bacteria test, come with B&D testing system, vacuum testing system
  • Original fuzzy control system driven by steam generator adopts 0WM(pulse with modulation), able to discriminate the fine differences in temperature allowances and to adjust the modulated waves correspondingly thus making temperature rise at the same speed each time

Model

ITA-212

ITA-216

ITA -218

ITA-223

Chamber Volume

12 L

16 L

18 L

23 L

Insulation Class

class B

Control Accuracy

Temperature 0.1 ?, Pressure 0.001 bar

Sterilization Level

Class B

Sterilization Temperature

121?,134?

Special Sterilization

HIV/AIDS, hepatitis b (HBV), mad cow virus and spore.

Drying Procedure

A strong negative vacuum drying

Operation Interface

Adopt the operation of the new interface LCD screen can display temperature and pressure time running state, fault alarm information, etc

Test system

Bowie & Dick Steam penetration test, Vacuum test, Helix test

Control Accuracy

Temperature 0.1°C, pressure 0.1 K pa.

Sterilization Data

External USB connection , (printer is optional)

Multiple Safety

Interlock protection device: Safety valve, Pressure interlock, door alarm, automatic breakdown check. Over temperature and pressure protected.

Water System

Internal open water tank, easy to clear.

Sterilization Configuration

Activities tray rack, match 3 pallets

Display

LCD display

Working Temperature

134 °C

Working Pressure

2.1 bar

Warm Up Time

0 to 7 minutes

Pump down Time

10 minutes

Air Intake Time

4 minutes

Working Time

6 minutes

Drying Time

18 minutes

Quick Drying Time

9 minutes

Total Time

40 minutes

Security

Safety valve, pressure system, mechanical and electric lock. Self-diagnosis, pressure-protection device, heating-exceeding

Test Programmers

Helix/BD Test; Vacuum Test

Drying Progress

3-times pulsation vacuum, temperature less than 0.2% after finish

Interface

USB/External Printer

Power Consumption

1600 W

1700 W

1800 W

2000 W

External Dimensions

625x425x456 mm

625x425x456 mm

625x425 x456 mm

625x425 x456 mm

Chamber Dimensions

       200x360 mm

230x360 mm

250x360 mm

250x450 mm

External Dimensions

616x460x420 mm

616x460x420 mm

616x460x420 mm

616x460x420 mm

Net Weight

-

-

-

-

Shipping Dimensions

655x545x450 mm

655x545x450 mm

655x545x450 mm

750x545x450 mm

Gross Weight

-

-

-

-

Electrical Requirements

110V/60Hz

220V/50Hz

110V/60Hz

220V/50Hz

110V/60Hz

220V/50Hz

110V/60Hz

220V/50Hz

Catalogue No.

580050501

580050502

580051001

580051002

580051501

580051502

580052001

580052002

Model

ITA-212

ITA-216

ITA -218

ITA-223

Chamber Volume

12 L

16 L

18 L

23 L

Insulation Class

class B

Control Accuracy

Temperature 0.1 ?, Pressure 0.001 bar

Sterilization Level

Class B

Sterilization Temperature

121?,134?

Special Sterilization

HIV/AIDS, hepatitis b (HBV), mad cow virus and spore.

Drying Procedure

A strong negative vacuum drying

Operation Interface

Adopt the operation of the new interface LCD screen can display temperature and pressure time running state, fault alarm information, etc

Test system

Bowie & Dick Steam penetration test, Vacuum test, Helix test

Control Accuracy

Temperature 0.1°C, pressure 0.1 K pa.

Sterilization Data

External USB connection , (printer is optional)

Multiple Safety

Interlock protection device: Safety valve, Pressure interlock, door alarm, automatic breakdown check. Over temperature and pressure protected.

Water System

Internal open water tank, easy to clear.

Sterilization Configuration

Activities tray rack, match 3 pallets

Display

LCD display

Working Temperature

134 °C

Working Pressure

2.1 bar

Warm Up Time

0 to 7 minutes

Pump down Time

10 minutes

Air Intake Time

4 minutes

Working Time

6 minutes

Drying Time

18 minutes

Quick Drying Time

9 minutes

Total Time

40 minutes

Security

Safety valve, pressure system, mechanical and electric lock. Self-diagnosis, pressure-protection device, heating-exceeding

Test Programmers

Helix/BD Test; Vacuum Test

Drying Progress

3-times pulsation vacuum, temperature less than 0.2% after finish

Interface

USB/External Printer

Power Consumption

1600 W

1700 W

1800 W

2000 W

External Dimensions

625x425x456 mm

625x425x456 mm

625x425 x456 mm

625x425 x456 mm

Chamber Dimensions

       200x360 mm

230x360 mm

250x360 mm

250x450 mm

Internal Dimensions

616x460x420 mm

616x460x420 mm

616x460x420 mm

616x460x420 mm

Net Weight

-

-

-

-

Shipping Dimensions

655x545x450 mm

655x545x450 mm

655x545x450 mm

750x545x450 mm

Gross Weight

-

-

-

-

Electrical Requirements

110V/60Hz

220V/50Hz

110V/60Hz

220V/50Hz

110V/60Hz

220V/50Hz

110V/60Hz

220V/50Hz

Catalogue No.

580050501

580050502

580051001

580051002

580051501

580051502

580052001

580052002

Download Catalog

download pdf product details

16 other products in the same category

Tabletop Autoclave...

Tabletop Autoclave ITA-218(220V/50Hz)

$2,700.00

The ITA-218 front loading ‘Benchtop’ autoclave range is available in four sizes. These units require no plumbing, and only a standard single phase power supply. A 5.7-inch colour touchscreen with integrated USB data port. Electro polished stainless steel chamber.